Table of contents:
Afe Cold Air Intake Filter – This aFe Stage-2 cold air intake outs the factory intake system by 48% for a maximum performance of 12 hp and 13 lbs. k ft of torque. This feeder uses a highly engineered one-piece heat shield that requires minimal assembly for ease of installation. Heat-insulated, roto-molded intake manifold and 3-corner adapter improve volumetric efficiency for maximum performance while lowering intake air temperature (I.A.T.). Filtering duties are performed by a factory oiled Pro 5R cotton gauze, washable/reusable, 360 degree radial flow air filter that provides maximum performance while still maintaining high airflow. Using the factory mounting points, this system ensures a hassle-free installation. This suction system is made in the USA.
5-1/2 cone Pro 5R 360 degree air filters for maximum flow. This 5-layer progressive oiled cotton gauze air filter provides maximum flow for increased power and torque.
Afe Cold Air Intake Filter
Dyno Tested Intake Pipe: The intake pipe is designed to maximize air speed and is dyno tested and flow tested using the latest engineering tools for maximum performance and throttle response.
Momentum Gt Cold Air Intake System W/dual Filter Media
One-Piece Filter Housing: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm air out of the engine for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all brackets and hardware for hassle-free installation.
Great product from AFE Power, my most favorite upgrade to my Jeep JKU. Installation was super easy, all said and done it took me about an hour. CAI gives the Jeep an excellent and aggressive sound on the road. Very happy with my purchase, worth every penny.
This thing is FANTASTIC. If you want to hear your pentastar sing and can only afford one mod, this is it. The sound the engine makes when you remove the plastic cover from its mouth will shock you. It will also lighten your gas pedal for more immediate power response. The hose is also better quality than standard plastic hose. you can hear the difference at this link – http://www.youtube.com/vatch?v=p2f4Uh6aE1UThis 7″ tall 360 degree radial flow air filter features a large 5″ flange and our pre-lubricated Pro 5R five layer media progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flow air, which typically results in the largest power gain of any of our filter options. This medium is perfect for street use. Its inverted tip creates a larger filter area, resulting in longer service intervals.
The included massive air filter is surrounded by an open element XSLPE (cross-linked polyethylene) polymer housing that minimizes hot engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Uses OE vehicle air intake without additional hardware. An additional auxiliary air inlet is available for use for supply air when under power, or can be closed with the included plug if desired.
Momentum Gt Cold Air Intake System W/pro 5r Filter
This system features a high-quality, computer-designed, dyno-tuned intake manifold to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat resistant and extremely durable.
The computer-designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design allows for a simple, straightforward bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patented filter-housing interface, uses half the number of parts of a traditional cold air intake system.
This item will fit Dodge Durango models equipped with a Dodge SRT hood. For these vehicle models, the air filter is located just below the SRT vent on the hood. aFe POVER recommends purchasing the pre-filter 28-10033 to protect the air filter from rain and other elements. aFe POVER strongly recommends avoiding pressure washing around the hood vent and driving in heavy rain. This Stage 2 air intake system uses a 3-1/2 IN black powder coated aluminum tube for the intake tract, a massive 5-1/2 IN Pro 5R air filter. The simple snap-on case uses the factory lower air box for easy installation. A 3-corner adapter is used to accelerate airflow after the air filter for improved performance and throttle response. All of this together produces 18 peak horsepower, 23 lbs. k ft of torque and shed the factory intake by 27%.
5-1/2 IN Reverse Tip Cone Filter- This intake uses a huge, 5-1/2 IN Pro 5R performance oval cone air filter with reverse tip for maximum flow. This 5-layer progressive oiled cotton gauze air filter provides maximum flow for increased power and torque.
Magnum Force Stage 1 Cold Air Intake System W/pro 5r Filter Media
Top Mounted Heat Shield Design – aFe developed this heat shield to clip on top of the bottom half of the factory airbox to ensure a hassle free installation using the factory mounting locations.
3-Corner Adapter – The 3-Corner Adapter is used to accelerate airflow after the air filter for improved performance and throttle response.
Hassle Free Installation This intake replaces the factory intake box and uses the factory inlet pipe. All hardware and components are included for a hassle-free installation.
I just received this part in the mail 2 days ago. The installation was even easier than I thought, it only took me 30 minutes and I am by no means a master mechanic. The fit is great!! I especially like how it uses the bottom of the factory airbox, which saves a few steps where many other intakes make you screw on the heat shield on the side of the engine compartment. I definitely notice an increase in torque under acceleration but what really blew me away is how this intake really brings your engine to life under acceleration, I mean the 5.7 hemi already sounds good but this intake really makes it growl under power. 10/10 would buy again and recommend over other cold air intakes!!!
Momentum Hd Cold Air Intake System W/pro 5r Filter Media
Some sort of foam sealant or spacer that would allow the spring clips to work better. It seems loose and sloppy. Overall, I’m satisfied, but it could be better. This 9″ tall 360 degree radial flow air filter features a 5-1/2″ flange and our pre-lubricated Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Provides your engine with the highest amount of high flow air and gives the biggest power gain in most cases. This medium is perfect for street and/or trail use.
The included massive air filter is surrounded by an open element XSLPE (cross-linked polyethylene) polymer housing that minimizes hot engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Uses the vehicle’s original equipment air intake without additional hardware.
The lightweight barrel is computer designed to achieve maximum power gains while maintaining a perfect fit. Made from 100% twill carbon fiber, it is fiberglass free and clear coated for the highest quality construction.
The computer-designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design allows for a simple, straightforward bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patented filter-housing interface, uses half the number of parts of a traditional cold air intake system.
Afe Power Magnum Force Stage 2 Cold Air Intake System Pro Dry S Filter For 16
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. This cold air intake system produces up to 13 hp, 17 lbs. k ft TK, and exceeded the factory intake by 37%. Included in this cold air intake system is an 18 gauge powder coated heat shield and a massive 8″ radial flow aFe POVER Pro 5R oiled filter. The air filter uses a unique patented flange retention design that allows the filter to be securely mounted on the heat shield without any hardware Huge 1-piece mandrel bent black powder coated intake tube maximizes air velocity ensuring maximum performance and throttle response. This is a direct bolt on kit and requires no cutting or drilling.
The air filter uses a unique patent-pending flange retention design that requires no hardware to mount the filter to the heat shield to ensure a quick, hassle-free installation with minimal hardware.
A large mandrel-bent intake pipe is used to smoothly direct increased airflow into the engine for maximum performance.
A massive 8″ air filter is used for maximum flow and efficient filtration. The Pro 5R performance air filter features 5 layers of progressively finer cotton gauze mesh and is made of 100% polyurethane for long life and multiple cleaning cycles.
Track Series Carbon Fiber Cold Air Intake System W/pro 5r Filter
All in all, a simple kit to install with minimal effort. All you need are a few common tools and about 30 minutes to an hour of your time. The set is of good quality. The tube is quite robust and withstands vibrations and heat well. I’ve had this kit on my chrysler 300S for about 3 years now and it still looks and feels like the first day I installed it minus all the dust lol.
If I had to do it all over again, I would buy a dry filter kit. I say this
Afe cold air intake, afe cold air intake 4runner, afe cold air intake replacement filter, afe cold air intake filter 5.9 cummins, afe cold air intake jeep jk, afe cold air intake 6.0 powerstroke, afe vs k&n cold air intake, afe cold air intake tacoma, afe stage 2 cold air intake, afe cold air intake dry filter, afe momentum cold air intake, afe cold air intake filter cleaning
