6in Lift Kit Ford F150 – BDS increases the performance and capabilities of 2021 Ford F150 trucks with 6-inch coil-over suspension lift kits. These kits feature proprietary FOX 2.5 coil-over shocks designed specifically for bolt-on performance to increase ride and ability to absorb the roughest terrain along with smooth road comfort. This kit includes everything you need to properly set up your F150 truck with clearance for up to 37″ tires.
This kit takes advantage of BDS’s proven high-rise design for improved ground clearance, strength and off-road protection, while correcting the suspension and steering geometry for excellent on-road handling characteristics. Up front the kit uses FOX 2.5 coil-over shocks with remote reservoir, high-arch 1/4-inch thick steel crossmembers, multi-piece differential relocation brackets, and a skid plate designed for off-road protection. Steering geometry is corrected to the new higher ride height with a pair of massive CNC machined ductile iron steering knuckles. These, combined with the supplied sway bar relocation brackets, brake line brackets, alignment cam bolts, supplied hardware and more provide a complete front suspension lift ready for use and abuse.
6in Lift Kit Ford F150
In the rear the BDS uses high-strength fabricated lift blocks and longer U-bolts to lift and level the stance along with perfectly tuned FOX 2.0 Performance Series shocks.
Ford F150 6
FOX 2.5 coil-overs are available with optional DSC (dual-speed compression) adjustment to optimize high- and low-speed compression damping allowing for greater control on the road with the ability to easily dial in more aggressive damping off-road. Fine-tuning is a simple twist of two clearly defined knobs with instant feedback to adapt it to any terrain.
BDS maximizes ground clearance with its laser-cut heavy-duty crossmembers that are 1/4 inch thick and perfectly tailored. Paired with a system of front skid plates that bolt together to create a rigid subframe while adding extra protection.
BDS corrects the steering geometry at the new higher ride height using a pair of high strength CNC machined ductile iron steering knuckles to work with replacement tie rod ends to maintain steering angles for proper operation and ESC compatibility.
The cookie settings on this website are set to “allow all cookies” to give you the best experience. Click Accept cookies to continue using the site. Give your ’11 – ’13 Ford F-150 an aggressive new look and unprecedented off-road performance with the 6-inch suspension lift from Rough Country. This all-in-one kit contains everything you need to take your Ford off the highway and into the fields. Featuring a set of durable raised knuckles and strut spacers, you’ll get enough ride height to fit up to 35 inch tires! A set of differential drop brackets, sway bar drop brackets, brake line brackets, and a driveshaft spacer help keep everything at an optimal angle for a factory-like ride, even after lifting. A front and rear cross member made of 1/4 inch thick sheet steel gives uncompromising strength and good looks to your truck, featuring a laser cut "RCX" logo and an easy to install design. Our 4-inch fabricated rear blocks offer significantly greater strength than their cast iron counterparts and were specially designed by Rough Country to prevent axle wrap. Improve the quality of your ride on and off-road with premium N3 shocks from Rough Country! These high-pressure nitrogen-charged shocks and 10-stage variable valving deliver a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston and faster-cooling 54mm shock body, this shock offers tensile strength up to 36kN for a long life of impressive vibration damping.
Superlift Develops 4 1/2” And 6” Lift Kits For Ford F 150 Pickup Truck
Features: Track width remains the same as factory Increased ground clearance Levels the front with the rear of the vehicle Fabricated blocks are stronger and offer longer life than cast blocks. Specially designed anti-axle wraparound rear blocks maintain stock ride quality while eliminating common lift block problems.
Return Policy Exchange, Returns, Refunds: extremeperformance.com will gladly accept returns on items returned within 30 days of the original purchase date according to these guidelines: You must contact us and let us know that you intend to return a part. Please provide specific reason for return along with all product details including damage, delivery experience, incorrect order, etc. Take a photo of all delivered parts and their parts so you can issue an (RGA) for those specific parts. You will receive a return authorization number for the goods. The process to receive an RGA number usually takes 72 hours. RGA Number: Write the RGA number in large black letters on the outside of the returned package along with a copy of the original invoice. Package Return: Return your package(s) postage prepaid. The customer is responsible for return shipping costs. Note: All returns are subject to a 20% restocking fee. Refunds will be given on parts only, not labor/installation charges, shipping, or any other charges. All parts must be returned in the original packaging, cannot have been damaged or installed and must be in original condition. All returned parts must be shipped prepaid and are subject to a repackaging fee. ** Please check your order for any signs of exceptions or damage upon delivery. If damaged, note it on the courier’s delivery receipt and refuse the shipment. Even if no external damage is visible, open packages and inspect for any damage or deficiencies. Receiving Your Refund: Once we receive your package, we will process your refund immediately. You can expect to see your credit within 5-10 business days. If your items have not arrived within 20 days of the original purchase date, please email us so we can look into the situation. *Due to the popularity of some items, shipping times may take longer than the estimates below. We thank you for your patience during the delivery of your items. **Extremeperfromance.com reserves the right to refuse credit for returns based on, but not limited to, the following conditions. Items returned for issues not covered by warranty. Improper RGA. Product instructions direct customers to deal directly with manufacturers. Manufacturer’s warranty policies may take precedence over the issuance of credits. Extremeperformance.com is not responsible for return shipping when the customer is at fault. Customer is responsible for shipping charges to and from the origin if the incorrect part is returned and may be subject to a restocking fee.
Due to increasing demand and shortages in the supply chain, we ask that you contact us before placing your order. We want to avoid cancellations and offer you the best ordering experience. Thank you! Fabtech’s world-renowned IFS suspension design for the Ford F150 provides excellent handling both on and off-road. The absence of bump steer during the suspension cycle helps reduce driver fatigue while improving overall vehicle handling.
Ford F150 4wd 6in Suspension Lift Kit W/struts & N3
The near-stock track track keeps the tires under the fenders for a clean look. Fabtech’s proprietary steering knuckle geometry provides excellent lockout to lock the turning radius for maneuvering in tight spaces.
Rugged 1/4″ thick steel crossmembers feature eccentric-style alignment cams for easy adjustment. Triple front differential mounts reposition the differential for vibration-free operation at high speeds.
Dirt Logic 2.5 stainless steel coilovers provide 6″ of lift with exceptional ride quality both on and off-road. They are designed for aggressive off-road use but have a supple feel on-road. Dirt Logic 2.25 rear shocks help dampen the vehicle for a balanced walk.
At the rear of the vehicle, the factory 2″ block is replaced with a 5″ block and U-bolt system.
Superlift Suspension Systems K127b: 15 16 Ford F150 6
Fabtech addressed all aspects of the suspension to ensure proper wheel travel and lock-to-lock steering without excessive cycling. For added safety, this lift comes with a complimentary 5-year, 60,000-mile powertrain warranty.
1/4″ thick steel lower control arm. Crossmembers are arched for maximum ground clearance. The welded box design of these crossmembers provides additional strength to the front suspension.
Fabtech’s extended length ductile iron steering spindles provide zero bump steer throughout the suspension travel. This provides an improved driving experience over stock. Close-to-stock track width keeps tires under fenders for a clean look.
Constructed with a stainless steel body with NitroSteel stem for maximum corrosion resistance and durability. Superior ride quality both on and off-road. Excellent damping for off-road use.
View Build 6 Inch Lifted 2022 Ford F 150 4wd
A rugged front differential skid plate is made of 1/4″ thick steel to protect the differential from off-road obstacles.
Triple differential mounts correctly reposition the front differential for precise HP and driveshaft angle to reduce high-speed transmission vibration.
1/4″ thick steel drop brackets reposition the front sway bar for increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel.
5″ tall steel rear lift blocks replace the 2″ factory blocks for additional lift without changing ride quality or load capacity.
Inch Suspension Lift Kit Strut Spacers 04 08 F 150 2wd Rough Country
High quality heavy duty U-bolts are designed to secure the entire rear differential to the vehicle. A critical part that requires the best quality for your vehicle.
Stainless steel body with NitroSteel® stem offers maximum corrosion resistance and durability. High-quality componentry provides superior ride quality on and off the road
6in body lift kit, best 6in lift kit, rc 6in lift kit, 6in lift kit ford f250, bds 6in lift f150, 6in suspension lift ford f150, 6in fabtech lift kit, ford ranger 6in lift kit, 6in lift f150, 6in lift kit, 6in suspension lift kit, 2013 f150 6in lift